Soffit & Fascia Repair That Protects Your Roofline
Your soffit and fascia are the last line of defence between weather and the inside of your roof. Tough Trough repairs and replaces rotted, sagging, or pest-damaged soffit and fascia, protecting your attic, your eavestroughs, and everything underneath.
WHY IT MATTERS
Small on the Roofline, Big on Protection
Soffit and fascia don't get much attention until something goes wrong, but they do real work. The fascia holds your eavestroughs and seals the roof edge, while the soffit lets your attic breathe. Let either fail and you invite rot, pests, and moisture into the structure.
Soffit
The panels under the roof overhang. They ventilate the attic and close off the underside of the eaves.
Vented options to correct poor attic ventilation
Keeps attic airflow moving to fight heat and moisture
Seals out birds, wasps, squirrels, and other pests
Installed in low-maintenance aluminum or vinyl
Fascia
The board running along the roof edge that your eavestroughs mount to.
Gives your eavestroughs something solid to hang from
Seals the roof edge against wind-driven rain and snow
Rotted or soft boards replaced before damage spreads
Capped in aluminum for a clean, weatherproof finish
KNOW THE SIGNS
Signs Your Soffit or Fascia Needs Attention
Peeling or Flaking Paint
Bubbling or peeling on the fascia usually means moisture is getting into the wood underneath.
Likely Repair
Soft or Rotting Wood
Fascia that feels spongy or crumbles is rotted through and needs replacing before it spreads.
Replace
Pests getting In
Birds, wasps, or squirrels in the eaves point to gaps or damaged soffit panels.
Repair & Seal
Sagging Eavestroughs
Troughs pulling away can mean the fascia they're mounted to has weakened or rotted.
Inspect
Water Stains Inside
Stains in the attic or along the top of exterior walls can trace back to a failed roof edge.
Repair Soon
Visible Gaps or Damage
Cracked, dented, or missing panels let weather and animals straight into the roof structure.
Repair
After Tough Troughs
WHAT TO EXPECT
How Our Soffit & Fascia Work Goes
1
Inspection
We check the full roofline for rot, pest damage, ventilation issues, and any eavestrough problems tied to the fascia.
2
Remove Damage
Rotted board and damaged panels come off, and we assess what's underneath before rebuilding.
3
Install
New fascia and soffit go up in low-maintenance aluminum or vinyl, with vented soffit where airflow needs a fix.
4
Seal & Finish
Everything is capped, sealed, and cleaned up, with eavestroughs re-hung and tested if they came down.
FREQUENTLY ASKED QUESTIONS
Soffit & Fascia Questions, Answered
What's the difference between soffit and fascia?
Fascia is the vertical board along the edge of the roof that your eavestroughs attach to and that seals the roofline. Soffit is the panelling underneath the overhang that ventilates the attic and closes off the underside of the eaves. They work together. Fascia protects the edge, soffit lets the roof breathe.
Can you replace fascia without removing the eavestroughs?
Sometimes, but not always. Because eavestroughs mount directly to the fascia, sections often need to come down to replace rotted board properly. We'll tell you up front what your job needs, and we can re-hang or replace the eavestrough at the same time.
Why is my soffit important for attic ventilation?
Vented soffit lets fresh air flow into the attic and push heat and moisture out. Without it, trapped moisture leads to mould, wood rot, and ice dams in winter. If your attic runs hot or damp, blocked or missing soffit vents are a common cause.​
​
Should soffit and fascia be done with new eavestroughs?
It's the ideal time. Since the eavestroughs are already down for a replacement, addressing any rotted fascia and worn soffit in the same visit saves you a second job and gives you a fresh, sealed roofline all at once.
